Led lamp from RGB or White LED Strip Circle

thingiverse

You must print eight LED stick STL files. This requires eight small screws. To get started, you will need: * An LED strip (RGB or white) * An LED strip remote controller or a custom-made one (I made mine with an Arduino microcontroller) * A 12V power supply 1. Print all of the parts. Screw part 1 to part 2 from the bottom and glue them together with a cylinder, along with eight LED sticks. Then, glue the top brown part on and screw it into place at the top transparent part. 2. Remove the screws from the bottom parts and insert eight pieces of LED strip and a driver inside. Place another piece of LED strip in the top transparent part and connect it via wire through the cylinder to a driver. Put the DC Jack on the back of the case and the IR receiver in the front hole. 3. Connect all wires to the driver and screw the housing back into place. And that's it! You're done!