LED flexi strip fixing (nail up fixing for 10mm flexi LED strips)

thingiverse

A Simple Fix for Flexible LED Strip Rolls on Wood or Soft Materials Just clip this simple fix onto your flexible LED strip and you're good to go. It fits standard LED strips found online, like those on eBay, with an internal width of 10.2mm. The mounting holes are designed for a 1.2mm panel pin/tack, making it easy to secure the clip in place. Be careful when nailing into the surface, as hitting the LED strip can cause some sections to die - I learned that one the hard way! To install LED strips on a wooden wall, use a spacing of about 30cm (12 inches) between clips. Print Settings Printer: Ultimaker 2 Resolution: 0.1mm Infill: 30% No Rafts or Supports Needed Rotate the Print for Smooth Results Printing Notes I printed with PLA at 210°C and 60mm/s, with a layer time of 10 seconds. The print takes about 5 minutes per clip, depending on your printer. Post-Print Care Just bang it into place with a nail - easy! If you want a more flexible part, try printing with ABS.