Leapfrog Creatr (2Н) Y+10 mm
thingiverse
I'm replacing my old Y endstop solution on my Leapfrog Creatr 2H. I've modified the printer to keep it away from the hotbed area and moved it to a "cold" place to optimize its performance and safety. The part is now attached using two M6x16 screws, which are screwed into existing mounts. The Y endstop switch can be repositioned in its new location using the original native screws and nuts. Simply add 10 mm to the Y-axis length in your printer settings (Repetier host or other software), reboot the Leapfrog system, and print as usual. Here are my recommended print settings: Printer Brand: Leapfrog Printer Model: Creatr Rafts: No Supports: No Resolution: .15mm Infill: 70%+ Notes: Print with high-temperature plastics only (ABS is recommended; PLA may not work). Printing time is approximately 1 hour and 15 minutes using these settings.
With this file you will be able to print Leapfrog Creatr (2Н) Y+10 mm with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Leapfrog Creatr (2Н) Y+10 mm.