LDO Orbiter 2.0 Anchor for P1P Printable Cable Chain

prusaprinters

My Ender 5 Pro was in need of a cable chain to manage wiring with an EVA 3.0 toolhead without adding too much height to my existing enclosure. Hobo4ssassin's design is great and well tested, so I chose it as the base to design what I needed.This is the anchor for the moving end of the cable chain that will mount to the extruder with some added hardware.Hardware:(2) ~18mm M3 Standoffs (16mm should fit with almost no clearance behind the extruder motor) (2) M3x10 Screws (Mount the anchor to the standoffs)(2) M3x20 Screws (Need to replace the LDO supplied screws for exposed thread behind the extruder to mount standoffs)(1) Zip Tie (To secure cables to the anchor)Printing:I use an actively heated chamber with my printer that reaches 65C routinely. I chose ASA for my part. PLA, PETG will be suitable for open printers or even brief exposure to heat..4 nozzle, 0.2mm layers, 3 shells(0.4mm each) are sufficient, recommend ~30% Infill of your choice. No supports needed.Make sure to orient correctly. The model will likely import upside down. Fusion 360 and STEP Files included, Feel free to remix.