LcRacing to 1/10 scale wheels conversion

thingiverse

I designed these wheels to convert 1:10 scale tires to the correct hub of the Lcracing 12b1 and EMB buggys, and all others that are similar. Be warned that the 10th scale tires are a little wider so I gave you the choice to make any offset or wheelbase you want. FYI -- Stock Lc12b1 offset is 7.5mm -- These measurements were taken from the face of the wheel to the face of the hub hex. 5mm or less offsets with the wider tire really puts a lot of tire inboard of the hubs so I decided not to make them, If you need less offsets please let me know and I'll post them up here. The photo's are 9mm offsets. WARNING!!!! The center hub is only 2mm thick which is the weakest point and I spent hours trying to make it strong and perfect, here are my settings.... 1 wall -- 4 top layers -- 2 bottom layers -- 100% infill Gyroid -- print speed 60, 20 to start -- fan at 60 -- support with roof -- AND THEN..... 100% fan at the first layer of the hub then 20% for the rest of the print for more strength. These prints are around 4 hours but you should have one solid little wheel. The Solid wheels don't really need so much infill so you may want to reduce them layers, they wind up pretty heavy if you don't.