LCD Panel Face Plate & Bracket for Folger Tech Kossel 2020

thingiverse

I remixed the LCD bracket from my Prusa i3v and adapted it for use with my Folger Tech Kossel 2020. This project is a remix of: http://www.thingiverse.com/thing:1276141 Before printing the faceplate or any other parts, I suggest you print FT_LCD_FacePlateTest_Rev11.stl to ensure a proper fit. One of my LCD displays was slightly crooked and required adjusting the opening for the display. To complete your final prints, you will need to print either FT_LCD_AllParts_Rev11.stl or individual parts such as FT_LCD_FacePlate_Rev11.stl, FT_LCD_LeftAndRightBrackets_Rev11.stl, FT_LCD_TopCoverPlate_Rev11.stl, and FT_LCD_4x_Spacers_Rev11.stl. Hardware Requirements: * 4 M3x16mm socket head or Pan Head screws to attach the faceplate to the brackets * 2 M3x16mm socket head or Pan Head screws to mount the Top Cover plate to the brackets * 2 or 4 M3x8mm screws and T-Nuts for attaching to 2020 Aluminum (I had leftover parts from my build) While installing, I realized that it would be better if the slots for the Right and Left bracket were designed to slide onto the bolts in one direction. I've updated the uploaded parts with this change. The left bracket has a slotted opening with a .3mm plastic bottom, which printed well for me; however, I had to trim it with wire cutters. You can also edit the provided OpenSCAD file if you want to make further adjustments. I printed these parts at 20% infill using yellow PETG and included photos to guide assembly.