LCD Cover for Raspberry PI4 w/ Hyperpixel Display

prusaprinters

<p>This is a remix of the LCD Covers for Raspberry PI4 w/ Hyperpixel display.</p><p>After reading some reviews about the existing ones being too tight and possibly cracking the display, I designed this one so that RPI w/ Hyperpixel simply slips in the side. I also updated the case for a Raspberry PI 4.</p><p>In addition the LCD mounts are adjusted so that you can mount it directly to the printer or on the outside of a case (i.e. LACK enclosure). The mount is design such that the case simply slips in from the top and then screws on the side are used to secure it in place so it doesn't slip out.</p><p>I also included a very basic cover for the bottom of the Raspberry PI4 so that you don't accidentally touch the electronic connections on the bottom.</p><p>Recommend printing the case with extra supports. I used the new slicer to paint on the areas I wanted support.</p><p>** Newest version allows for headphone jack to fit through without trimming.</p><p>*** Newest version reduces the MK3S+ screen opening and moves the headphone jack up just slightly.</p>