LCD 12864 Graphic Smart Display Controller Holder for 8020 T-Slot Aluminum Frame

thingiverse

Update: Check out this alternative display mount that holds the LCD display vertically from the extruded aluminum, and allows the Arduino and RAMPS to be mounted directly to the backplate. This is a display holder for the 12864 Graphic Smart Display Controller designed for 3D printers. I got mine with an electronics kit, but you can also purchase this display as a standalone LCD monitor. I made it to attach at a 45-degree angle onto 25mm 8020 T-Slot Extruded Aluminum. Hardware Needed 4 M3x25 screws (I only had 3 in my pictures) 4 M3 washers and nuts 2 each M6 bolts, washers, and T-Nuts for your aluminum extrusion. I used 12mm bolts, but you may need a different length depending on your T-Slot. Print Settings Printer Brand: RepRap Printer: Prusa i2 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Print the 'LCD Face' in face-down orientation. If you have strong bed adhesion, be careful removing it. I recommend pulling it up from the face directly attached to the bed and not by the angled overhang. I designed this project using Autodesk Fusion 360. Thanks go out to thing:855134 for sharing the STL model of the display PCB, which helped me design this case.