Launchpad for FPV Racing, workbench and Model stands

thingiverse

I think we need a bit of innovation here. This launchpad, workbench, and stand for the quads is quite practical. It works for just about any 3" to 6" quad, except for those super long ones like the Vendetta. LiPos go on top or bottom, no problem. The thing just unfolds, snaps into place with the clips, chooses your angle, and you're flying. You can choose start angles from 0° to 35° in increments of 5°. So far, this thing has really proven itself, even at races, on wet surfaces, or in grass. Let's see what you guys think. When folded up, the launchpad measures 140mm x 170mm x 30mm, which means you should have a print bed size of 140mm x 170mm. The heavier it is, the better - that's just good weight. I've recently split the side panels in case there are any printing issues with the whole thing. Now I just need to glue them on. You can also order one at FPVracing.ch. What you'll still need: Filaments: I think almost anything will work, but my first ones were printed with PLA and my latest ones with FormFutura FlexiFil - Flexible TPC, which is basically unbreakable. Mounting: Everything's stainless steel with cylinder head screws and locknuts. 4 x M4x12mm for the base plate and side panels 2 x M3x30mm for the clips on the base plate 2 x M3x18mm for the arms on the side panels 2 x M3x12mm for the struts on the arms 4 x M4 locknuts 6 x M3 locknuts Print Settings: Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1, 0.15 Nozzle 0.4 Infill: 50%