Lattice night light shade

prusaprinters

<p>Shade for replaceable-bulb night lights which accommodates tall bulbs such as neon candle-flicker bulbs.</p> <p>I bought a night light with a replaceable screw-in (C7 / E12) bulb, replaced the provided incandescent with a neon flame bulb (to reduce nighttime blue light, and because it's fun), and found out the original lampshade would not fit over the new taller bulb.</p> <p>This replacement shade is taller (74 mm) and open on the top rather than the back, and also has a decorative pattern of holes. It must be fitted to the night light before the bulb.</p> <p>You will probably need to redesign the mounting section to fit your choice of night light base; the one I bought and designed this for does not appear to match the common design of “make your own night light” bases at all.</p> <p>Also on GitHub: <a href="https://github.com/kpreid/3dp-night-light-shade">https://github.com/kpreid/3dp-night-light-shade</a></p> <h3>Print instructions</h3><p>No brim or supports are are required; the single overhang is designed for uncomplicated bridging.</p> <p>The parameters as provided are set to provide a 2-extrusion-thick wall for 0.4 mm extrusion width; a single layer is also an option for more transparency at the expense of raggedness since every edge is then an extrusion start/stop point.</p>