Lattice Cube

prusaprinters

<p>Update 06-01-19<br/> It turns out that the 3x3x3 model wasn't quite levelled correctly, thanks to hojokono for pointing it out. I have now re-uploaded the model so that it lands squarely on the bed in your slicer.</p> <p>Update 16-1--16<br/> Added a smaller version with 15mm cubes for smaller printers.<br/> All of the lattices are 3mm diameter.</p> <p>UPDATE: Updated both models with the correct orientation for printing and added filet to bottom of bases.<br/> Also enlarged and flared the base of the large cube for better stability and bed adhesion.</p> <p>This thing was inspired by Makers Muse YT stream <a href="https://youtu.be/gfbK-orCIAY">https://youtu.be/gfbK-orCIAY</a><br/> Angus does a ton of extremely helpful videos on 3D printing.</p> <p>This was my first real effort with Fusion 360, I've been dabbling with it for a week or so and was looking for ideas, then Makers Muse gave me the perfect challenge.<br/> As you can see from the third pic, the big one came off the bed after 5 hours of printing ... should have used a skirt. Argh!<br/> So I designed a smaller version which printed perfectly.</p> <h3>Print instructions</h3><h3>Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Print Settings</h3> <p><strong>Printer Brand:</strong> RepRap</p> <p><strong>Printer:</strong> Original Prusa i3 MK2</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.3 and 1.6</p> <p><strong>Infill:</strong> 20% for the base, none for the rest.</p> <p><strong>Notes:</strong></p> <p>The large cube was printed @ 0.3 layer height just to check it would print ok.<br/> The small one was printed @ 0.16 layer height<br/> Both models had 20 infill for the base and none for the rest.</p>