Lattice Christmas Tree Topper

thingiverse

I designed this ornament to be reminiscent of Renaissance architecture. It's quick and easy to print and assemble. It's made of 3 pieces that fit pretty well. A drop of glue is all that's needed to secure them. The tallest piece is under 150mm. So, you should be able to print this on most printers. You can attach the top directly to the bottom (no middle section) to make a shorter ornament or connect multiple middle sections to make a taller ornament. I included two different designs for the top piece. Both look great. Cura will warn that the lattice version is not watertight, but I had no problems slicing or printing it. The ornament is very light and doesn't require infill or supports. I used a raft, but that's optional for this print. For those who have larger printers, I've attached one piece versions. However, they are much larger than my printer can print, so they should be considered experimental. Please also see: * [Spiral Christmas Tree Topper](https://www.thingiverse.com/thing:4702723) * [Festive Christmas Tree Topper](https://www.thingiverse.com/thing:4699452) * [Modular Festive Christmas Ornaments](https://www.thingiverse.com/thing:4688572) * [Festive Christmas Ornaments](https://www.thingiverse.com/thing:4669248) * [Festive Spiral Christmas Ornaments](https://www.thingiverse.com/thing:4689760) * [Festive Christmas Ornaments 4](https://www.thingiverse.com/thing:4691945) * [Poinsettia Lattice Christmas Ornament](https://www.thingiverse.com/thing:4695127)