Latch Cryptex - Cerrojo

thingiverse

**This Latch is Not a Toy and Can Create Hazardous Situations.** --------------- **Important Notes:** 1. All parts can be printed without support, except the pin. 2. There are two models, one opens to the right and the other to the left. The discs with numbers are used for both designs, and to set the combination you need to look at the name of the .STL file. Thus 0R-1L.stl serves as a zero if it's for the right-hand design and as a one for the left-hand design. 3. Only the pin needs to be sanded. Use metal sandpaper bent in the middle and check that the discs move very smoothly through the pin before assembling. 4. Don't insert the discs upside down, or they won't work well. Look at the corresponding photo. 5. It's possible to lock the latch when it's open and when it's closed, which protects the combination from being copied. The latch can be removed to change the discs and the combination. 6. The lock has 6 discs that generate 1,000,000 possible combinations. It also has ridges so that it can't be opened by touch. And it doesn't allow you to see inside. It's very resistant and shouldn't be used in places where not opening the door could be dangerous. **Disclaimer:** Use at your own risk. This device is not designed to be used as a safety device, it was designed for demonstrative use, not as a toy or as a safety device. It has not been tested under actual conditions of use.