Last Gen Food Dehydrator Tray Mesh

prusaprinters

<p>Picked up a <a href="https://www.amazon.com/gp/product/B0973PLG76">Last Gen food dehydrator </a>during a nice deal. Instead of cutting up the trays I'm using them to hold/dry desiccant beads and using these <a href="https://www.thingiverse.com/thing:4754084">interlocking walls </a>for drying spools. The Last Gen seems to be a cheaper clone of the <a href="https://www.amazon.com/Commercial-Chef-CCD100W6-Dehydrator-Preservation/dp/B075ZB3V9S">Commercial Chef CCD100W6</a> so it may for work that as well.</p><p> </p><p>I printed using 0.3mm layer height settings, 35% rectilinear infill. and no top or bottom layers in PrusaSlicer. That should slice out to 4 layers of mesh - a quick and easy print. You can change infil percentage as you like if you want a finer/coarser mesh. I'd recommend PETG or similar for the heat resistance rather than PLA.</p><p> </p><p>One could make a remix that extends out past the tray's nubs towards the actual wall for a more complete fit. But there are no holes in that area, so aint nobody got time for that.</p>