Laser Cut Magnetic Fume Extraction for xTool M1

prusaprinters

I made a version of my 3D printed magnetic fume extraction system that can be laser cut and uses a standard size of PVC pipe.  These models are designed to use standard 2.0" or 2.5" PVC pipe from any hardware store.  My google search says 2" PVC should have an outer diameter of 2.375", so I made the hole 2.4" for it.  This will be a little too small for the xTool fume hose so plan on using zip ties or tape or something to secure the hose.  Alternately, you can print the 2.5" version and shove the fume hose on the pipe - it will be a tight fit but I think it will work.  Maybe.  It uses 60mm x 10mm x 3mm bar magnets from Amazon:  “LOVIMAG Powerful Neodymium Bar Magnets, Rare Earth Metal Neodymium Magnet - 60 x 10 x 3 mm, Pack of 24”.  You'll need 6 magnets total for this piece.  Glue the pieces together - wood glue would be best, but hot glue or any other glue would probably work as well.  See the spread out picture for the stackup.  After you glue the pieces together glue the magnets in, paying attention to polarity.  I recommend epoxy to glue the magets in, and maybe putting a layer or three of tape over them.  I have not cut any of these files myself so I make no guarantees that this will work.  Let me know in the comments if something needs to be changed!