Large Gothic Ruins

thingiverse

A vast set of enormous ruins for your printing pleasure. Each massive piece measures 200mm tall, 105mm wide and 5-10mm thick. Printing each part takes between 8 and 11 hours on my Ender 3 but may vary based on your settings and machine. Images are provided solely for reference purposes and to showcase examples of what can be achieved, the railing at the top of the wall is not included along with the searchlight or floors. I have added left and right facing versions of the ruined walls to give you maximum flexibility when assembling them. Included are some columns (the insets indicate where they should align on the walls) so you can position them at 90 degree angles. The columns are split into two halves, one for the top and one for the bottom. There are two smaller column pieces which fit together and attach to the bottom of the top column and the top of the bottom column to form a complete piece. The Large Door model comes in five separate parts which are all optional, with one of the two flat pieces glued to the back of the eagle head while the larger piece is attached to the front of the balcony overhang. These all mount on the front of the model (see images for clarification). Each wall features an inset running along its entire length, allowing you to print some floors and glue them in place. They have been designed to fit my own floors which can be purchased from my shop (https://modularwargaming.com/), but any type of floor designed for 28mm wargaming should also fit. No specific print settings are required, but I used Ender3TerrainBetav1.3. Feel free to adjust as you see fit. https://www.3dprintedtabletop.com/resources/3d-printing-profiles/?v=8e3eb2c69a18