Large capacity bird feeder

prusaprinters

Large capacity bird feederMade to be used with 75mm (3mm) PP drain pipe. Alternatively it is possible to print the pipe, although the length is then limited by the printer (I've added a suitable printable pipe).Made to be mounted to trees. Water drain holes at the front of the feeder tray. How to printAll partsPreferably use UV resistant filament (ABS / PETG).All angles are designed to be printed without supports, although supports may be needed depending on the printer.Print the main feeder and the top plug. If using a PP pipe, the printable pipe is not needed.Optional printable pipe: Extend the printable pipe to fit your printer height, and print the pipe. MountingCut a notch in the PP pipe to open up for the bird food prior to inserting it into the feeder.Use an adhesive between the pipe and the main part of the feeder to make it water proof.The printable cap may be used to plug the top of the pipe.Secure the feeder using the hole in the feeder and a rope higher up on the PP pipe. NotesI have not tested the printable pipe as I used a long PP drain pipe. It might be a tight fit, so some trimming may be required.