Laptop Stand Smoother

prusaprinters

I bought the Nulaxy Laptop Stand laptop stand from Amazon, the https://www.amazon.com/gp/product/B07P54RSPY I really like the stand it's super solid. But I feel like the edges on the base are a bit sharp for sliding sensitive in the middle. So I made a smoother to cover the front of the base. NOTE: LET THE PART COOL! The top of the model, which is face down to the printer when you print it, is pretty thin. If you pull these right off a heated bed, the (still warm) print may warp. After printing, let the bed/part cool down before removing it. The edges have fillets/chamfers. These should print OK even at 0.2mm, but I printed at 0.15mm to better support (especially) the fillet. Orientations of the .STL files should be "ready to print". A Fusion 360 export file is provided. Mostly parameterized. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: Prusa Prusament PLA, 1.75 Mystic Green How I Designed This =================== Measure. Draw in Fusion. Revise. Revise. Revise. Category: Office