Laptop stand

prusaprinters

<p>In the office I use 2 external monitors in addition to my laptop. Because the height of each screen is different, however, the arrangement was not very ergonomic. For this reason, I have adapted the design from David Miao and made myself a stand for my Lenovo Thinkpad X1 Carbon.</p><p>I used a glued board made of beech. The dimensions can be found in the sketch. I wanted the wooden board to be flush with the 3D printed side parts. Therefore I milled off 5x8mm on 3 sides with a router.</p><p>In Prusa Slicer the STL file "laptopstand_modifier" can be loaded as modifier. The following setting is then made in this: Honeycomb infill with e.g. 8%, no bottom and top layers.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p><strong>Printer:&nbsp;</strong></p><p>i3 MK3</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0,2mm</p><p><strong>Infill:&nbsp;</strong></p><p>100%</p><p><br><strong>Filament:</strong><br>Prusament PLA Galaxy Black</p>