Laptop Camera Cover (4 Wall Vase Mode)

Laptop Camera Cover (4 Wall Vase Mode)

prusaprinters

Vase mode is the only time your printer is achieving its full 3D printing capabilities. All other methods I would consider 2.5D printing. Vase mode allows you to print continuously without pausing to go up to the next layer. The only downside to this is that you’re limited to only one perimeter wall which makes your prints very fragile. This model explores what’s possible allowing you to print multiple perimeter walls in vase mode!   *** Some people reached out to me and were having trouble printing this in slicers other than Cura. The tolerances on this model are extremely tight and by default, slicers like Orca slicer as well as Galaxy slicer close small gaps in models. If your slicers does this, you will not be able to print this in vase mode. You need to ensure your settings allow for EXACTLY 0.35mm - 0.40mm line width. Any deviation from this and this print will not work. If you can't slice it, try slicing in cura ***How to print: layer height: 0.15~0.32mmlayer width: 0.35~0.4mmspecial mode: vase mode/spiralize outer perimeter top/bottom values: set to 0 prints in under 10 minutes! 3 grams of filament! I have tested in both PLA and PETG, both very sturdy.   this should be extremely easy to print and is an amazing showcase of what your 3D printer is capable of. Calibration Tips:If you need to Calibrate your Printer, My Go-To Calibration Cube is one designed by me that tests multiple areas in a fast quick print. https://www.printables.com/model/650696-deathly-hallows-calibration-cube ***update 9/20/2023 added an STL file, works better in some slicers vs 3MF***

Download Model from prusaprinters

With this file you will be able to print Laptop Camera Cover (4 Wall Vase Mode) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Laptop Camera Cover (4 Wall Vase Mode).