Lantian 90L frame parts (cam seat, runcam micro swift mount, xt30 mount, motor softmounts, FC softmount)

thingiverse

Human: Info: BG now offers taller spacers (22mm): https://www.banggood.com/4-PCS-Frame-Kit-Parts-Aluminum-Column-M2D3_522-for-Runcam-Swift-Mini-p-1198296.html. These spacers work without adding nuts to increase height. Update: I added a "love seat" style mount for the Micro Swift. Mount camera with good double-sided tape. The frame height is not quite enough, so two M2 nuts were used to slightly raise the top plate. Thin double-sided tape was also added under the mount to make sure it stays put. This mount allows the use of full 2-inch props. Update: I added a mount for the Runcam Micro Swift in 2 variations. The camera is a very tight fit, so corners of the lens mount were filed down to make it fit at a good angle. You will be limited to 1935 or shorter propellers and have to use countersunk screws (M2x4 or M2x5), otherwise props will hit the mount. Update: Added a thinner, lighter XT30 mount to reduce weight and increase space from the prop edges to the mount. A slightly modified camera mount was also added to bring it forward another 1-2mm to reduce the amount of frame edges visible due to high FOV of these cams. This is a complete set, mainly meant to be printed in TPU/TPE. The cam mount fits the Eachine EF-02 and Boldclash cameras, just add a dab of glue to keep it from falling out. It's set at roughly 30 degrees, but can be varied by holding the cam at a lower angle and gluing it then. Motor softmounts are used beneath the motors, adding approx. 1mm of height. FC standoff is 3mm tall and acts both as spacer and anti-vibration mount. The XT30 mount requires a drop of glue on the XT30. The XT30 mount and cam seat are meant to be slid onto 4mm diameter aluminum spacers. The 90L frame (http://www.banggood.com/90L-90mm-Brushless-Micro-FPV-Racing-Frame-Carbon-Fiber-14g-p-1135513.html) comes with hex spacers. Order these with the frame instead: http://www.banggood.com/Eachine-Aurora-100-Mini-Brushless-FPV-Racer-Spare-Part-M2D3_520-Hexgonal-Column-4PCS-p-1135504.html. Print Settings: Printer: Mendel90 Rafts: No Supports: No Resolution: 0.2mm Infill: 30+