Lana Bedside lamp

prusaprinters

<p>This is a copy of the Lana from Netflix's series "Too hot to handle". The design was made from photos of the real Lana, so the dimensions may differ from original.</p> <p>The assembly consists of 3 parts:<br/> 1)Bottom part<br/> 2)Transparent part<br/> 3)Top part</p> <h3>Print instructions</h3><p><strong>Printing</strong></p> <p>a)Top and Bottom parts:<br/> -FDM (Prusa MK3s)</p> <ul> <li>white PLA filament<br/> -0.6mm nozzle<br/> -0.4mm layer height<br/> -2 perimeters<br/> -15% infill<br/> Print both parts with the closed side laying on the bed</li> </ul> <p>b) Transparent part<br/> -SLA (Wanhao D8)<br/> -Clear UV resin<br/> -0.05mm layer height<br/> If you want to try printing this part on FDM printer with transparent filament probably it will do the job.</p> <p><strong>Lights</strong><br/> For our Lana we used IKEA OMLOPP led light and we placed it in place with a drop of hot glue. Note that there is a hole on the bottom for the wire. (Tip: If you want to colour your Lana just use a coloured piece of paper over OMLOPP. See the pictures for our red version) In general any type of circular LED that fits the bottom part is good for light source.</p> <p><strong>Assembly</strong><br/> There are not any special instructions. just place the 3 parts in order. If you want to keep it in place you may use a couple of drops between each part.</p> <p>Enjoy!</p>