Lamp Shade Gyroid Infill stackable square

thingiverse

Lampshade for Standing Lamp - Stackable - 200mm x 200mm - Thickness: 20mm This is my initial design, created because my paper lampshades are old and mostly broken. I used SketchUP 2018 to develop it and included the files in the package. I was unable to move the infill-sides.stl part on the z-axis to position it correctly within the frame using slic3r PE, so I lengthened this part by 20mm. This modification allows me to import and place the infill-sides.stl part inside the frame without any issues. After slicing, everything appears to be properly aligned. I also imported the infill_top-bottom.stl part and placed it within the frame. Once all necessary parts are imported, slice them again and verify that everything is correctly aligned. It can be a bit tricky to position the infill parts inside the frame accurately. The concept behind this design originated from https://www.thingiverse.com/thing:3017657, but I built it anew from scratch. Here are some slic3r PE settings I used; feel free to modify them if needed: infill_top-bottom.stl: - Fill Density: 20% - Fill Pattern: Gyroid - Bottom and Top Solid Layers: 0 infill-sides.stl: - Fill Density: 20% - Fill Pattern: Gyroid - Perimeters: 0 All frame parts were printed using standard slic3r PE settings. Filament Used: OWL PLA from ebay (Germany) After printing, assemble the frame parts together; they are stackable to any desired length. Note: I believe this design may be too thick, as only the top frame part with infill requires 1187 grams of filament. This makes the lampshade more expensive due to standard price filament, in my opinion. I hope my English is sufficient; I am from Germany. I hope you like my design. A big thank you to https://www.thingiverse.com/MatsErik/about for inspiring this idea.