Lamp base

prusaprinters

<p>My cheap desk lamp came with a base that clamps onto the side of the desk. Unfortunately, that clamp places the lamp off the side of the desk so I couldn't use it with my workbench against the wall. I made this replacement base to move the lamp forward enough to freely rotate.</p><ul><li>designed for 12mm lamp posts (seems to be common)</li><li>two m4 hex nuts slot into base</li><li>two very long m4 screws pull together (I used m4 x 65mm)</li><li>glue notch onto bottom of base (aligning &amp; clamping with shorter m4 screws helps)</li><li>optional m4 x 20mm socket cap to lock lamp post (hex nut drops into slot inside lamp post hole)</li></ul><h3>Print Settings</h3><p><strong>Printer:</strong> Prusa Mini</p><p><strong>Supports:</strong> Yes</p><p><strong>Resolution:</strong> 0.2mm</p><p><strong>Infill: </strong>15% gyroid</p><p><strong>Filament:</strong> Hatchbox ABS Black</p>