Lamp #24 - CityScape

prusaprinters

A free-form cubic frame lamp. Old factory style, abstract Cityscape.185 mm height x 150 mm WidthPrint 2 of each of the walls and 1 of each of the base  and the lid.Melt 1 x M3 Inserts into the bottom and top bar of each wall. Attach the walls to each other. The connections are tight, so work them into each other gradually to loosen them a bit. Run the cable through the base, attach the cable and switch wire to the socket and turn the  socket into the base plate.  Then attach the base plate using 2 to 4 M3 x 8mm screwsSlide the lamp shade cover into the 4-wall frame and attach the lid wit the M3 by 10 mm screwsUse  supports for the 2 shorter wall pieces. from baseplate only,  to support the wall connector pieces.The fassung-lamp socket ( e14-28 mm):     https://www.amazon.de/dp/B097K4YNL9The electrical cable and switch:     https://www.amazon.de/dp/B002DAOX58The E14 Bulb used here:     https://www.amazon.de/dp/B0B5MPL9MX8 M3 by 14 screws    https://de.aliexpress.com/item/32443118299.html?8 x M3 Inserts    https://www.amazon.de/dp/B08BCRZZS3? The slicer settings for the shade base and shade holder,  cage frame and top.20 mm Standard(All standard settings and speeds, Aligned seam settings)Filament:  eSun PLA+ Black The slicer settings for The Shade:Supports required. I used auto-tree from build plate only on a P1P.Filament:  Sunlu PLA+ White.20 mm Standard  Quality and Generic PLAInfill %  - 30 , GyroidWall Loops - 6 Seam Position- Aligned