Lamello Top vacuum adaptor - Absaugadapter

thingiverse

Vacuum adaptor for Lamello 'Top' or 'Junior 10' biscuit joiners. Should also fit the models '3S', 'G2A', 'G2', 'Dynamic' and 'Directa', since these all use the same original part (LMA-74), which mounts in a similar way to this model. The hose connector has an inner diameter of 35 mm. The vacuum adaptor is mounted to the machine using a M4x16 screw (panhead) in the front and a M5x26 screw (countersunk head) and nut at the rear. There are 3 files: "Lamello_TOP_vacuum.stl" is the normal vacuum adaptor. "Lamello_TOP_vacuum_box.stl" is a version of the vacuum adaptor that is slightly modified so that the machine fits the original wooden box with the adaptor still attached. If the machine is not to be stored in that box, i recommend using "Lamello_TOP_vacuum.stl" instead. "Lamello_TOP_vacuum_ring.stl" is an optional part that fits over the end of the hose connector. When glued in place, it prevents the hose connector from breaking (splitting along layer lines) when the vacuum hose is inserted.