Lack Table Leveling Foot
thingiverse
This is a leveling foot designed for use with a Lack table from Ikea. It requires four printed feet, four 5/16" T-nuts, and four 5/16" x 1 1/2" hex bolts. Find the center of the bottom of each Lack Table leg and drill a 3/8" hole at least 1 1/2" deep. Place the T-nut in the hole and secure it firmly with a hammer. Place the leveling foot on the head of each bolt. If the fit is too tight, try reprinting at a slightly larger scale. Screw the bolt and leveling foot into each leg of the Lack table. Adjust the bolts to level the table perfectly. Printer Settings: Tevo Tarantula printer Rafts: No rafts are needed Supports: No supports are required Resolution: 0.1 mm resolution Infill: 20% infill is used Notes: This design uses PLA plastic.
With this file you will be able to print Lack Table Leveling Foot with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Lack Table Leveling Foot.