Lack table Enclosure Remix

thingiverse

This is a remix of several different designs. I tried to keep credit in the file names , I added "Mod" in front of the ones I altered , and ones I did not change have the maker in the file name from the original design. You don't have to grab files from any of the others I put the full set in here. Remixes https://www.thingiverse.com/thing:2864118 https://www.thingiverse.com/thing:3485510 https://www.thingiverse.com/thing:2685750 https://www.thingiverse.com/thing:4041924 https://www.thingiverse.com/thing:2244619 https://www.thingiverse.com/thing:2730728 I removed the 2mm space for the plex on the brackets so the plex will go all the way to the top and sides , and the bottom will be held by the brackets , so the plex will be 3mm thick 444mm wide, 442mm tall , the doors will be 440mm tall x 220 mm wide. for door magnets I just got a magnet sheet from the dollar store. Print 2 of the Maker select wire grommet , You'll have mark and cut the table. The prusa leg brackets for the front top youl will need to add a small angle bracket that does not interfere with the sliding doors. print 4 of the tennis ball feet and 4 of the tennis ball cups , screw them to the legs The art deco corner brackets were to have a piece of white paper behind it to hide the leg brackets (or at least make them blend in a bit. Use 1 screw through the cup and bracket into the leg then the 2 screws on the outside. All the door hinge pieces need to be flipped and printed with supports (sanding or filing required) The prusa video is a great guide to assembly Don't buy cheap tennis balls they collapse.