Lack enclosure : screwless tool holder

prusaprinters

<p>Design inspired from:<br/> <a href="https://www.thingiverse.com/thing:3267474">https://www.thingiverse.com/thing:3267474</a><br/> <a href="https://www.thingiverse.com/thing:4194407">https://www.thingiverse.com/thing:4194407</a></p> <p>This toolholder will directly attach around the lack leg. It is tight enought to stay in place (beware of scratches if you do not apply proper sanding).</p> <p>Vertical honeycombs instead of solid walls spare about half of the original plastic (but increase the print time).</p> <p>The design is compatible with original design accessories, and other remixes (screwdrivers holders...)</p> <h3>Print instructions</h3><p><strong>Print</strong><br/> Print files for PETG, but I guess PLA is fine (I wanted the same colour as the enclosure PETG parts).</p> <p>0.3mm layer height (0.2mm doubles the print time!)</p> <p>Vertical honeycomb may lead to print fails, but I had none.</p> <p><strong>Post-print</strong><br/> Loads of stringing due to the high number of bridges (vertical honeycomb - PET doesn't help! PLA may be better). You can remove them with a heatgun.</p> <p>Sanding is needed to fit perfectly to the table leg. If it's too tight you will damage the leg coating: scratches are highly visible on coloured lack tables.</p>