LACK enclosure feet
prusaprinters
<h4>General description:</h4><p>If you put your LACK enclosure tabletop, there is no place for my favourite spare steel sheet holder:<br><a href="https://www.prusaprinters.org/pl/prints/51462-expandable-steel-sheet-holder-mk-mini">https://www.prusaprinters.org/pl/prints/51462-expandable-steel-sheet-holder-mk-mini</a></p><p>So I've designed a set: smaller (square) for rear and a bit wider for front (just to made holder installation easier). There are two versions for front feet - v2 is a bit narrower (safe for large nozzles ;)</p><p>If your table isn't perfectly level, adjustable feet are welcome - there is a room for feet with M8 screw (i. e. IKEA LÄTTHET, btw: you'll find TPU pads for them here: <a href="https://www.prusaprinters.org/pl/prints/77128-ikea-latthet-tpu-pads">https://www.prusaprinters.org/pl/prints/77128-ikea-latthet-tpu-pads</a>) - you will need 4 M8 nuts.</p><h4>Printing:</h4><p>Filament: any, PETG preferred. <br>I've printed with following settings: 0.6 nozzle preferred, 0.3mm layer height, 3 perimeters, 15% rectilinear infill, no supports required (but putting nuts after print is done may require some heating due to a space limited by bridging - a pause for nuts recommended, but not critical).<br>Only front left feet is included - make right one using <i>mirror</i> option in Slicer. Rear feet should be printed twice. Whole set fits on Prusa MK3, but if you fail, </p>
With this file you will be able to print LACK enclosure feet with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on LACK enclosure feet.