Kyria Pimoroni Trackball Mount

prusaprinters

This is a mount for the pimoroni trackball to go on a kyria keyboard. The 3 similar designs (not the "original") would probably fit in any case, but the original is pretty specific to the case found here, which can also be seen in the pictures. I also took the kyria logo for one of the designs from that case. This will require a few M2 screws to attach the trackball to the mount and the mount to the keyboard. with one of the 3 similar newer designs, mine used two M2x4mm screws for the trackball->mount, and one M2x8mm for the mount->keyboard. Print Settings Printer: Sunlu S8 Rafts: No Supports: Doesn't Matter Resolution: 2 Infill: 20 Filament: Sunlu PETG White Notes: I printed it with supports, but it should work either way. It's a fairly short bridge to get across on the bottom of the wire shield. This took me about 15 minutes to print at 50 mm/s. Category: Electronics