Kyle's Desk Lamp

prusaprinters

<p>This is a Monster Can designed to keep your friend Kyle from punching holes in drywall.</p> <h3>Print instructions</h3><p><strong><em>Materials</em></strong><br/> Can: Prusament Galaxy Black<br/> Logo: 3D Solutech Clear PETG<br/> Lid: Prusament Galaxy Silver<br/> Body Cover: Prusament Galaxy Black</p> <p><strong><em>Resolution</em></strong><br/> 0.2mm</p> <p><strong><em>Infill</em></strong><br/> 15%</p> <p><strong><em>Notes</em></strong><br/> The can body should be printed with supports. The "M" logo was printed with 0% infill and printed upside down with supports. The back cover should be printed on the thin edge with supports under the spring and two tabs. The lid is a separate file so that you can print in grey.</p> <p>There is a slot and a hole on the back intended for a microUSB and a standard push button.</p> <p>I used an arduino pro mini 5V as the brains of the the project but there are many other solutions. There is plenty of room inside the can for a microcontroller, speaker, etc.</p> <p>The clearance for the clear "M" is pretty tight on the front so be careful not to break anything off. You should be able to pressure fit it in a few millimeters and superglue it in place. The lid should also drop into place on top and be secured with super glue.</p> <p>I have also included my arduino code, which is a variation on the Adafruit Neopixel example button cycler. The button can be short pressed to select the mode and long pressed to activate-that mode will iterate 1000 times before defaulting to the standard Kyle Monster Green. Unplug to start over. I'm not the best coder so please adapt it as needed!</p> <p>Please enjoy and protect your drywall!</p> <p><strong><em>Code</em></strong><br/> <a href="https://github.com/3DVince/KyleDeskLamp/blob/master/Arduino%20Code">https://github.com/3DVince/KyleDeskLamp/blob/master/Arduino%20Code</a></p>