Kulp K8-PB (Pocket Beagle) Controller PSU Mount
prusaprinters
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 3 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface. Mounting Hardware: 2x - M4 - 8mm bolts (secure mount to PSU) 3x - M3 - 12mm bolts/nuts (secure controller to mount) Print Settings Notes: Print Settings Nozzle: .4mm (.6mm or larger will work too) Layer Height: .32mm Perimeters: 3 Solid Layers: 4 top/bottom Infill: 10% Speed: Standard, but slower is better for the support brackets Category: Electronics
With this file you will be able to print Kulp K8-PB (Pocket Beagle) Controller PSU Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Kulp K8-PB (Pocket Beagle) Controller PSU Mount.