Kriss Vector Gel Blaster Strike Face Front End

cults3d

Designed to suit the Kriss Vector V2 Gel Blaster. File could be improved but works as is for now. Consists of a main body with attachment rails and side panels. Designed for the top and bottom rail to print separate, gives you the option to paint the body and avoid the rails. Also prints better in this orientation. Fitment is tight for the rails, sanding/file may be required. Required 4 x M4 x 10mm + nut, 4 x M5 x 10mm (body will need to be tapped to suit or you can affix alternatively) Strike face screws on from the inside of the body. I used small screws to locate and glued in place. Holes are only pilot holes, you will need to drill to appropriate diameter to suit your hardware.