KRAGA Tere - test part

youmagine

This critical testing piece is the first section from the right wing of 3D printed hand launch plane KRAGA Tere. If you are able to print this part, then you should be able to print the whole plane. KRAGA Tere is a 70 cm big hand launch glider without remote control that is printed on a 3D printer and reinforced with carbon spars. More info can be found at https://www.3DprintedRCplanes.com/tere Video of assembled plane: The file is also available here: https://3dprintedrcplanes.com/download_test/tere/ Rafts are required. Notes: The part must be printed as a shell - 0% infill and no horizontal surfaces (the thickness of the shell is one layer). Only this way can you achieve the required weight of the plane. Nozzle: 0.4 mm Layer thickness: 0.19 mm Rafts: yes Use the default orientation and whatever printing material is chosen. Result verification: Your result should weigh 6 g. The wall of the shell must be printed by one pass of the printing head so that the shell is very thin. You should be able to fit a carbon tube with a diameter of 2 mm into the spar leading holes (bottom side of the part). I recommend trying to cover the testing part with covering film to test if the material chosen will not deform from ironing heat and if covering film will stick on it (I have tested many materials with multiple covering film brands without issues, but it can theoretically happen).