KP3S "Donut" Filament Guide

prusaprinters

<p>I had been using the elephant filament guide on my KP3S, but after building an enclosure, the filament path changed and the filament would work its way out of the guide from time to time. This simple donut-style guide has no slot for the filament to escape out of.</p><p>&nbsp;</p><p>After a few days of use, I realized the angle of the donut was less than ideal for my setup. &nbsp;I'm printing in an enclosure, and the filament enters slightly above the level of the guide. &nbsp;I've added a “crooked donut” model that is angled to work better in this configuration.</p><p>&nbsp;</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Kingroon KP3S</p><p><strong>Rafts:&nbsp;</strong></p><p>Doesn't Matter</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Resolution:&nbsp;</strong></p><p>0.24</p><p><strong>Infill:</strong></p><p>15%</p><p><strong>Filament:</strong></p><p>NovaMaker ABS</p><p>Orange</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>There's no great way to print this. I printed it as provided with tree-style supports and it worked out OK.</p><p>&nbsp;</p><p>Category: 3D Printer Accessories</p>