Kossel PSU Bracket S-250-12 / 240W
thingiverse
Simple bracket for mounting a 240W Power Supply (12V 20A 240W model S-250-12 Eccanixity purchased from Sourcingmap on Amazon UK). The power supply has four M3 threaded holes spaced at about 84mm x 126mm. Secure the bracket to the 20x20 extrusions on the printer with an M4 screw and nut, then attach the power supply using M3x6mm screws (one at the top is sufficient - the lower hole may be hard to access from inside the printer). These brackets provide 5mm clearance between the PSU and the printer, allowing a 220mm heated bed to fit comfortably, along with some space for a cover over the mains voltage connections. Print Settings: Printer: Anycubic Kossel Linear Rafts: No Supports: No Resolution: 0.2mm layer height, 0.8mm shell thickness Infill: 25%
With this file you will be able to print Kossel PSU Bracket S-250-12 / 240W with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Kossel PSU Bracket S-250-12 / 240W.