Koss Porta Pro Adapter for Oculus Quest 2

thingiverse

11/2 Corrected an error in the STL's ------------------------- Adapters to fit the Koss Porta Pro's to the Oculus Quest 2 Elite Strap. It uses a snap on design so they can be easily removed or moved. The only thing I was unable to do was incorporate a height adjustment easily so I have provided 3 different designs with 3 different heights. I have not been able to test the shortest one yet to make sure everything clears. I use the medium. The headphones attach to the adapter using a friction fit and it may be tight. I tried several sizes and it may have been my printer but it was always either too loose or kind of snug. I am still able to push it in and remove using a flat head screw driver as a wedge. The headphones do not fold up or any direction. They are always facing down. This mod will be destructive to the Koss Porta Pros. You have to remove the rivet behind the foam on the headband. Once the rivet is removed the assembly can be pulled apart easily. The headphone then can be easily removed from the assembly. After that you will want to detach the headphone from the ear piece and flip it upside down. This technically could be optional but it is better to have the wire facing up imo. After everything is assembled it can be clipped onto the Quest 2 Elite Strap where ever you need it. It can be easily unclipped and slid around. It will not easily slide when clipped in place. I am able to easily put the Quest 2 on with the headphones in place. I am not sure if anyone will have issues with that. I recommend printing on a raft. If you get an elephant foot it may bond the clip where it meets the bed. It can be separated using a flat head screw driver but I find it easier to just use a raft.