Kort Nozzle
cults3d
This is a Kort nozzle for RC model boating. It is designed for a Dumas 1.5-in. propeller. ABS filament was used. It uses a 1/8" control rod above the nozzle and a stabilizing rod at the bottom. The top of the nozzle is marked with a small T and inside is a notch to prevent the nozzle from spinning on the control rod. I found that there was still too much play in the control rod, so I drilled a small hole through the nozzle control sleeve and the control rod then inserted a small (1/16") wire through the holes.
With this file you will be able to print Kort Nozzle with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Kort Nozzle.