KobraMe - Hero Me Anycubic Kobra adapter

prusaprinters

This is my adapter for mounting the Hero Me Gen7 to the Anycubic Kobra. Please see https://github.com/Jookia/KobraMe for source code.You will need:1x A Hero Me Gen76x M3 heat sets6x M3 8mm screws  (optional, the Kobra toolhead screws will work)Printing guide:Load one of the PRINT_ME files in to your slicerSlice as usual, no supports are neededPrint the adapterInsert heat sets in to the sides and PCB holesRemove sacrificial plastic from the base holesAssembly guide:Unplug, remove and disassemble the Kobra's toolheadDisconnect and remove the toolhead PCB from the Kobra's toolheadScrew the toolhead PCB into the adapterScrew the Hero Me base into the adapterHold and line up the assembled adapter up with the carriage's holesPartially screw in the top right screwPartially screw in the bottom left screwPartially screw in the other two screwsFully screw in all screwsConnect the PCB adapterRunning the Hero Me on your printer will require custom firmware. The easiest way to do this is using Klipper. Unfortunately mainline Klipper does not work on the Kobra.I work on and recommend Catboat, a fork of Klipper that works on the printer without any hardware modification.I also recommend putting Koz's Moons motor cat ears on your printer. Nyan!