Kobra MAX spool holder with LED

thingiverse

This is Spool holder with LED holder for ANYCUBIC KOBRA MAX (LED light looks cool:)) You will need: PARTS: ___________________________ For: Spool holder (withOUT LED): 1. PVC tube (4cm) ___________________________ For: Spool holder WITH LED: 1. 1,6x1,6cm triangular LED profile with cover (~53,5cm) 2. Wires (+) & (-) (~1,5m) 3. Switch (bipolar) 4. White LED Strips (~50cm): 24V (better) or two 12V serial connected (+|-|+|-) 5. PVC tube (4cm) ___________________________ TOOLS: Alien Keys Wrench Soldering Iron Cutters for wires Optional: Glue (/hot glue) Sanding paper Knife ___________________________ STEPS: 1. Print L and R 2. Unscrew 3 screws from each side (totally 6) 3. Take 3d printed part and screw it 4. Do the same step for the other side 5. Put the 4mm tube with filament spool into printed parts (you can tilt printed parts a little) ^^^Done.^^^ Next steps for LED: !!UNPLUG 110/230VAC CABLE!! 6. Solder wires to LED strip 7. Put LED profile into printed parts 8. Glue switch whereever you want 9. Solder switch 10. (then make a route for the wires) (((optionaly:) I drilled 2 holes- one on the top on right 3d printer profile and another one under right 3d printer profile)) 11. Open bottom cover (unscrew 4 screws) 12. Connect + and - to free terminals of the 24V power supply 13. Close bottom cover with 4 screws ^^^Done.^^^ __________________________ If you have any questions- ask in the comment section :) If you did my project, post a picture If you like this, click "Like" If you want to donate me: https://paypal.me/dawswa ___ ♡