Kobra 2 neo led strip control box

thingiverse

Anycubic Kobra 2 Neo LED control boxI designed this box to control led strip mounted on a plastic light bar. I think i used this one. It is based on a DC buck converter voltage regulator. The idea is that you can turn on/off the light, and adjust the brightness with a potentiometer. The design is fairly simple and not the most elegant, so if you have ideas to enhance it, don't hesitate to suggest ! Materials1x or 2x led strip (mine are 12v white)1x 3.0-40V to 1.5-35V voltage regulator, i used this one1x potentiometer (i used a 2k with a 1k resistor next to it) to replace the trimmer in the original circuit. Value of the potentiometer may change depending on the voltage of the led strip. 1x simple 3 pin mini switchPrinting timePrinting time takes an hour for the box and 10 min for the little hood on the Kobra 2 neo with speed at a 100%. It doesn't need any supportsMountingTwo M3 screws are needed to mount the box to the aluminium profiles with nuts. Theres is 4 holes but 2 is enough. The box is pretty small, theres is not a lot of room but everything fits.I connected the circuit directly to the 24v output of the kobra power supply. Wires from the box to the led strip can be hidden in the z-axis aluminium profile.