Knife Sharpener

cults3d

Changes and enhancements are implemented as follows: Modify the handle for improved printability. Add a stopper to restrict movement on the current knife. All STL files are properly aligned for slicing and printing. Note that I couldn't find flanged F624ZZ and F608ZZ bearings in local stores, so standard 624ZZ and 608ZZ bearings were used instead - and it works just fine. Required components for construction: 1. One Ikea Immeln hook with the metal part (hook itself) removed. This has excellent suction cups for gripping the desk. Ikea Immeln 1. Two 8mm rods, one 200mm long and one 500mm long. These are similar to those used in 3D printers, and their length can vary slightly. 1. One spring approximately 30-50mm long with an inner diameter of 8-10mm. I didn't purchase this separately as it was taken from my old Apex clone from Aliexpress. 1. One LM8UU bearing 2. Two F624ZZ bearings (4mm x 13mm x 5mm) 2. Two F608ZZ bearings (8mm x 22mm x 7mm) Approximately ten N52 12mm X 2mm Super Strong Round Disc Magnets Rare Earth Neodymium magnets. Three M5x30-50 bolts and nuts One M4x30 screw and nut Two M3x15 Hex socket screws Five M3x20 Hex socket screws Five M3 nuts Two M3 self-locking nuts This work is licensed under a non-commercial-share-alike license due to the original work's licensing terms. It is a fork of https://www.thingiverse.com/thing:1622145