Knife shaped Key Organizer

pinshape

I updated this model, the latest one, not the previous version. This is a new and improved version of https://pinshape.com/items/224.... I made some changes to the design and split "key holder_1" into two separate parts, eliminating the need for support material during printing. The parts "key holder 1A" and "key holder 1B" are glued together and secured to "key holder 2" using three round spacers. I used these round spacers (http://www.hstronic-gmbh.de/Ab...) and threaded an M3 hole inside each one. There are two versions of the key organizer available. The first version can hold up to nine keys, while the second version is designed for up to five keys. The parts required for version one include: three round spacers 12mm long, a locking disc for nine keys (locking_disc_9_keys.stl), a key holder A (key_holder_1A.stl), a key holder B (key_holder_1B.stl), a key holder two (key_holder_2.stl), a keychain (keychain.stl), and a spacer (spacer.stl) to prevent rattling if fewer than nine keys are installed. Additionally, six M3x6 countersink screws (DIN 965) and one M3 washer are needed. The parts required for version two include: three round spacers 7mm long, a locking disc for five keys (locking_disc_5_keys.stl), a key holder A (key_holder_1A.stl), a key holder B (key_holder_1B.stl), a key holder two (key_holder_2.stl), a keychain (keychain.stl), and a spacer (spacer.stl) to prevent rattling if fewer than five keys are installed. Additionally, six M3x6 countersink screws (DIN 965) and one M3 washer are needed. Print Settings: Printer Brand: Deltaprintr Printer Model: Deltaprintr Kit Rafts: Not Required Supports: Not Needed Resolution: 0.2mm Infill: 25%