Knife-shaped Key Holder

thingiverse

Look at the new version http://www.thingiverse.com/thing:1810411 There are two versions of the key holder available. The first version holds up to nine keys and the second version holds up to five keys. Parts needed for the first version: Key holder_1.stl, key holder_2.stl, two standoff_9 keys.stl, one locking disc_9 keys.stl, one keychain.stl, and spacer.stl to prevent rattling if fewer than nine keys are installed (for example, two spacers if you only have seven keys). Three M3x20 countersink screws (DIN 965), three M3 locknuts, and one M3 washer. Parts needed for the second version: Key holder_1.stl, key holder_2.stl, two standoff_5 keys.stl, one locking disc_5 keys.stl, one keychain.stl, and spacer.stl if needed (for example, two spacers if you only have seven keys). Three M3x14 countersink screws (DIN 965), three M3 locknuts, and one M3 washer. The part key holder_1.stl requires support material. Key holder_1.stl and key holder_2.stl were printed with HDglass from Formfutura at a layer height of 0.175mm. For the standoff and locking disc, ApolloX from Formfutura was used, but ABS can also be used as an alternative. https://youtu.be/AG3s51Lnb9o https://youtu.be/mWeCin7zpsY