KMS VertiBus

thingiverse

The KMS VertiBus combines an Alien-style body with a vertical frame design known from the Infinitum and Singularitum frames by blitzfpv. Key Features: ==================== 5-inch Prop Size Vertical Box Style Frame 30.5x30.5 M3 Stack Size (1 Mounting position in the center) 20x20 M2 Stack Size (4 Mounting places, 1 shared with 30.5x30.5, 1 on top plate) 16x16 M3 Motor Mount Required Hardware: ==================== 8 x 30mm standoffs 16 x M3x8 button head screws 16 x M3x16 socket head screw Required Carbon Parts: ==================== **These should not be 3D printed; they need to be cut from 1.5mm and 2mm CFK** The CFK Parts contain a lot of slots that need to match the CFK thickness of the 2mm CFK Parts. The fitting needs to be tight, so they are designed with 0 tolerance. Depending on the CFK, you can get anything from 1.9mm to 2.1mm when ordering 2mm CFK. Therefore, the two additional zip files contain files adapted to match 1.9mm and 2.1mm. I strongly recommend doing a few test cuttings with the motor mounts and bottom plate to ensure a tight fit. All dog bone style corners are designed to fit a 1.5mm cutter. ### 1.5mm CFK: - 2 x Cam-Plate.dxf - 1 x Top-Plate-Type-1 or Top-Plate-Type-2 ### 2.0mm CFK: - 2 x Arm_type-1 - 2 x Arm_type-2 - 1 x Bottom-Plate - 2 x Brace-Front-Back - 2 x Brace-Side - 8 x Motor-Mount A short demo video: https://youtu.be/Ja7eXmKkDbM If this is your first vertical frame, look at my build instructions: https://youtu.be/j2TxkOUZpQ0