Kleiderstange

thingiverse

28mm Kupfer Stange oder VA oder divers Slicing engine Slic3r PE 1.4 Layer Height 0.2 mm First Layer Height 0.25 mm or % Perimeters (minimum) 3 Generate Extra Perimeters when Needed Yes Detect Thin Walls Yes Detect Bridging Perimeters Yes Number of solid layers on the top 3 Number of solid layers on the bottom 3 Seam Position Nearest External Perimeters First Yes Fill Density 0.2 0-1 (%) Fill Pattern Line Top/Bottom Fill Pattern Rectilinear Combine Infill Every: 1 Solid Infill Every: 0 layers Fill Angle 45 ° Solid Infill Threshold Area 70 mm2 Only Retract When Crossing Perimeters Yes Perimeter Speed 60 mm/s Speed for Small Perimeters 60 mm/s or % Speed for External Perimeters 50% mm/s or % Infill Speed 100 mm/s Solid Infill Speed 100 mm/s or % Top Solid Infill Speed 100 mm/s or % Support Material Speed 50 mm/s Support Material Interface Speed 100% mm/s or % Speed for Bridges 60 mm/s Speed for Gap Fill 40 mm/s Travel Speed 130 mm/s First layer speed 30 mm/s or % Loops 4 Distance from Object 6 mm Skirt Height 1 layers Brim Width 0 mm Overhang threshold 10 ° Enforce support for the first 0 layers Raft Layers 0 layers Support pattern Pillars Support pattern Spacing 6 mm Support pattern Angle 0 ° Support Interface Layers 3 layers Support Interface Pattern Spacing 3 mm Default Extrusion Width 0.4 mm or % First Layer Extrusion Width 0.4 mm or % periExW 0.4 mm or % External Perimeters Extrusion Width 0.4 mm or % Bridge Flow Ratio 1 mm Z Offset 0 mm Filament Diameter 1.75 mm Extrusion Multiplier 1.07 Extruder Temperature 197 °C Extruder Temperature (First Layer) 197 °C Bed Temperature 60 °C Bed Temperature (First Layer) 60 °C Cooling Yes Retraction Length 5 mm Retraction Lift Z 0 mm Retraction Speed 100 mm/s Retraction Extra Length on Restart 0 mm Minimum Travel After Retraction 3 mm Retraction Extra Length on Restart 0 mm Spiral Vase No Avoid Crossing Perimeters No Only Infill Where Needed No Infill Before Perimeters No Generate Support material No Don't Support Bridges No Complete Individual Objects No Enable Ooze Prevention No Keep fan on No Retract on Layer change No Wipe While retracting No