OLD Nintendo 3DS XL Charging Dock Cradle

This is OLD Nintendo 3DS XL Charging Dock Cradle, a remix of two different models, beautiful "Nintendo New 3DS Charging Cradle (Normal and XL)" but for new 3DS and functional "Charging dock for Nintendo 3DS XL - Remix" that I mixed between. It can be used as charger, for this you need to use "Spring Pogo Pin Connector Diameter 2.0 MM Height" I used 6mm height and it works fine (link where I bought it https://a.aliexpress.com/_uyImQF ). My result is painted by spray paint because I wanted to make it like super nintendo colour, but made it just simply silver and also it's painted pretty bad, so if you do not know how to do it - do not do it :)To make it work you need to:print one dock_Old3DSXL-Remix_SNES.STLprint one power_plug_Old3DSXL-Remix_SNES.STLto have two "Spring Pogo Pin Connector Diameter 2.0 MM Height 6mm"then just plug the "Spring Pogo Pin Connector Diameter 2.0 MM Height 6mm" inside the printed power_plug_Old3DSXL-Remix_SNES.STL, solder wires to them (be sure to observe the polarity) and plug it in to the printed dock_Old3DSXL-Remix_SNES.STLAnd it's done.I also uploaded source files for solidworks, if you want - you can make your modification.