Kitchen Sink Drain Strainer

thingiverse

This is kitchen sink drain strainer. Exterior diameter: 70 mm Depth 10 mm Interior diameter 40 mm at base. Version 7 prints as a single part, but requires supports during print to achieve a more solid result. Version 6 prints as two separate parts: the basket and the rim. The basket snaps into the rim with four rounded pins. Normally no glue is needed, but it can be applied if desired. The reason for printing as two parts was to avoid using supports. All parameters can be modified in the SCAD file to build a strainer for any-sized drain. If help is needed, just send a private message. Enjoy! Update 2017-06-17 Version 7 added, which prints in one piece for better strength but requires supports during print. Print Settings Printer Brand: RepRap Printer: Huxley Duo Rafts: No Supports: Yes Resolution: 0.3mm nozzle Infill: 90% Notes: Use 0.2 or 0.15 mm layer height 0.3 mm first layer height Three solid layers top and bottom Five millimeters brim One loop skirt Printed in ABS - do not use PLA if resistance to boiling water is desired. For Version 7, supports are required. See the image of Slic3r support properties for details