Kiosk 67 kit easy print

thingiverse

Come support these models over on [Patreon](https://www.patreon.com/WGraves) **Buy my time, Not my models.** Easy to print Kiosk 67 kit 1/100 scale. Some details have been changed for looks/ printability. I would suggest printing this in resin at 1/100 and either resin or filament at 28mm scales. This article is the best one I found and a good starting point for ideas on how to assemble these into larger structures: https://www.archdaily.com/806346/the-story-of-the-1960s-mass-produced-modular-design-that-actually-went-into-production The "kiosk 67 2 pod sample" is a good starting point to see how the kit works, and then you can go from there. The base components are the "pod" and the "tunnel" with the end caps being the remainder of the files. The "overhang" is the eave component where a window would be open underneath, like the retail window. Image is of that sample model printed in 1/52 with 28mm 3dbreed American for scale. The front is two retail windows with overhangs and the back is a standard door and a rollup door. If you are careful in the assembly the roof can be kept removable. You could fill and sand the X seams between the pieces, but I actually think it ends up looking cooler in miniature than the smooth, but that's personal preference. The resin files do not have the X seam. The "resin" files are for those of you that are printing with resin printers and would prefer the assembled models. If a part doesn't have a "resin" equivalent then use the standard part, as it has not been disassembled. Scale by 1.56 for gaslands / hotwheels / 1/64 Scale by 1.786 for 28mm / 1/56 || 1/52 (x1.92) IMO looks best for heroic 28mm.